Siemens SK Series Petunjuk Pengoperasian - Halaman 25

Jelajahi secara online atau unduh pdf Petunjuk Pengoperasian untuk Mesin pencuci piring Siemens SK Series. Siemens SK Series 36 halaman.

Halaman Cetak

1. Control Panel

Fault

A different error code is

indicated on the digital

display.

( :

to :

)

Display flashes.

Refill indicator for salt X

and/or rinse-aid P is lit.

Refill indicator for salt X

and/or rinse-aid P

is not lit.

Water is left

in the appliance at the end

of the programme.

Cause

A technical fault has probably

occurred.

Door not closed properly.

No rinse aid.

No salt.

Sensor does not detect salt

tablets.

Refill indicator switched off.

There is still enough special salt/

rinse aid available.

Filter system or area under

the filters 1* is blocked.

The programme has not yet

ended.

Fault, what to do?

Remedial action

Switch off appliances with the ON/OFF

switch (. After a short time restart

the appliance.

If the problem recurs, turn off the tap and

pull out the mains plug.

Call customer service and mention the error

code.

Close the door. Ensure that no objects

(utensil, fragrance dispenser) are protruding

over the basket and preventing the door

from closing.

Refill rinse aid.

Refill with special salt.

Use different special salt.

Activation/deactivation (see chapter Water

softening system/Special salt or Rinse aid).

Check refill indicator, levels.

Clean filters and area underneath (see

Waste water pump).

Wait until programme ends or reset (see

Terminating the programme).