Epson BrightLink 485Wi Mulai dari Sini Manual - Halaman 4

Jelajahi secara online atau unduh pdf Mulai dari Sini Manual untuk Proyektor Epson BrightLink 485Wi. Epson BrightLink 485Wi 6 halaman. Lamp and status information
Juga untuk Epson BrightLink 485Wi: Panduan Pengoperasian (47 halaman), Manual Koneksi (6 halaman), Panduan Instalasi (5 halaman), Template Pemasangan (5 halaman), Spesifikasi (6 halaman), Pernyataan Kesesuaian (4 halaman), Spesifikasi (6 halaman), Buku Panduan Instalasi (3 halaman), Buku Panduan Instalasi (2 halaman), Buku Panduan Instalasi (5 halaman), Manual (21 halaman), Mulai dari Sini Manual (6 halaman)

Halaman Cetak
Epson BrightLink 485Wi Mulai dari Sini Manual
3
Calibrate
Calibration coordinates the position of the pen with the
location of your cursor. If the pen position and cursor
location don't match, you can calibrate manually. You
don't need a computer, and you won't need to calibrate
again unless the projector or image is moved, or the
image is resized.
1
To start calibration, press the Menu button on the
remote control, select the Extended menu, and
press Enter.
2
S elect the Easy Interactive Function setting and
press Enter. You see this screen:
3
Select Manual Calibration and press Enter. You
see this screen:
4
P ress Enter to select Yes.
Follow the instructions on the screen to perform manual
calibration.
For more detailed instructions, see the on-screen
BrightLink User's Guide.
Using the Remote
Control
Turn projector
on/off
Access menu
system for
additional
adjustments
Page through
documents
Temporarily
turn off image
For more information on using the remote control and
cool time-saving buttons:
•
See the BrightLink User's Guide on your computer or
on the CD in this Welcome Kit.
•
Go to the training section and watch a video or two at
epson.com/brightlink (U.S.) or epson.ca/brightlink
(Canada) or atomiclearning.com.
Select from various
image sources
connected to the
projector
Enter
Zoom in and out
Stop video action