Epson BrightLink 485Wi 여기에서 시작하기 매뉴얼 - 페이지 4

{카테고리_이름} Epson BrightLink 485Wi에 대한 여기에서 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson BrightLink 485Wi 6 페이지. Lamp and status information
Epson BrightLink 485Wi에 대해서도 마찬가지입니다: 운영 매뉴얼 (47 페이지), 연결 매뉴얼 (6 페이지), 설치 매뉴얼 (5 페이지), 마운팅 템플릿 (5 페이지), 사양 (6 페이지), 적합성 선언 (4 페이지), 사양 (6 페이지), 설치 핸드북 (3 페이지), 설치 핸드북 (2 페이지), 설치 핸드북 (5 페이지), 매뉴얼 (21 페이지), 여기에서 시작하기 매뉴얼 (6 페이지)

페이지 인쇄
Epson BrightLink 485Wi 여기에서 시작하기 매뉴얼
3
Calibrate
Calibration coordinates the position of the pen with the
location of your cursor. If the pen position and cursor
location don't match, you can calibrate manually. You
don't need a computer, and you won't need to calibrate
again unless the projector or image is moved, or the
image is resized.
1
To start calibration, press the Menu button on the
remote control, select the Extended menu, and
press Enter.
2
S elect the Easy Interactive Function setting and
press Enter. You see this screen:
3
Select Manual Calibration and press Enter. You
see this screen:
4
P ress Enter to select Yes.
Follow the instructions on the screen to perform manual
calibration.
For more detailed instructions, see the on-screen
BrightLink User's Guide.
Using the Remote
Control
Turn projector
on/off
Access menu
system for
additional
adjustments
Page through
documents
Temporarily
turn off image
For more information on using the remote control and
cool time-saving buttons:
•
See the BrightLink User's Guide on your computer or
on the CD in this Welcome Kit.
•
Go to the training section and watch a video or two at
epson.com/brightlink (U.S.) or epson.ca/brightlink
(Canada) or atomiclearning.com.
Select from various
image sources
connected to the
projector
Enter
Zoom in and out
Stop video action