Epson BrightLink 485Wi 설치 핸드북

{카테고리_이름} Epson BrightLink 485Wi에 대한 설치 핸드북을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson BrightLink 485Wi 2 페이지. Lamp and status information
Epson BrightLink 485Wi에 대해서도 마찬가지입니다: 여기에서 시작하기 매뉴얼 (6 페이지), 운영 매뉴얼 (47 페이지), 연결 매뉴얼 (6 페이지), 설치 매뉴얼 (5 페이지), 마운팅 템플릿 (5 페이지), 사양 (6 페이지), 적합성 선언 (4 페이지), 사양 (6 페이지), 설치 핸드북 (3 페이지), 설치 핸드북 (5 페이지), 매뉴얼 (21 페이지), 여기에서 시작하기 매뉴얼 (6 페이지)

Epson BrightLink 475Wi / 480i / 485Wi

Projector Light Status

The lights on the projector's control panel indicate the projector status and let you know when a problem

occurs. Check the status and color of the lights and look for a solution in the table below.

Power light

Lamp light

Temperature light

Power light

Green

Flashing green

Orange

Flashing orange Off

Flashing red

Lamp light

Temperature

light

Off

Flashing orange

INSTALLATION HANDBOOK

Status and solution

Normal operation.

Warming up. Wait for an image to appear.

Standby or sleep mode.

Preparing network monitoring or shutting down.

(Wait for the light to remain orange before

unplugging the projector.)

Projector is too hot.

• Make sure that the vents and air filter are not

clogged with dust or obstructed by nearby

objects.

• Make sure the environmental temperature is not

too hot.

• If overheating continues, replace the air filter.

Lamp and Status Information