Epson BrightLink 485Wi Installatie Handboek

Blader online of download pdf Installatie Handboek voor {categorie_naam} Epson BrightLink 485Wi. Epson BrightLink 485Wi 2 pagina's. Lamp and status information
Ook voor Epson BrightLink 485Wi: Start hier Handleiding (6 pagina's), Bedieningshandleiding (47 pagina's), Aansluithandleiding (6 pagina's), Installatiehandleiding (5 pagina's), Montagesjabloon (5 pagina's), Specificaties (6 pagina's), Conformiteitsverklaring (4 pagina's), Specificaties (6 pagina's), Installatie Handboek (3 pagina's), Installatie Handboek (5 pagina's), Handmatig (21 pagina's), Start hier Handleiding (6 pagina's)

Pagina afdrukken
Epson BrightLink 485Wi Installatie Handboek
Epson BrightLink 475Wi / 480i / 485Wi

Projector Light Status

The lights on the projector's control panel indicate the projector status and let you know when a problem
occurs. Check the status and color of the lights and look for a solution in the table below.
1
Power light
2
Lamp light
3
Temperature light
Power light
Green
Flashing green
Orange
Flashing orange Off
Flashing red
Lamp light
Temperature
light
Off
Off
Off
Off
Off
Off
Off
Off
Flashing orange
INSTALLATION HANDBOOK
Status and solution
Normal operation.
Warming up. Wait for an image to appear.
Standby or sleep mode.
Preparing network monitoring or shutting down.
(Wait for the light to remain orange before
unplugging the projector.)
Projector is too hot.
• Make sure that the vents and air filter are not
clogged with dust or obstructed by nearby
objects.
• Make sure the environmental temperature is not
too hot.
• If overheating continues, replace the air filter.
Lamp and Status Information
1