Siemens EH9..SZ... Buku Petunjuk - Halaman 11
Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Kompor Siemens EH9..SZ.... Siemens EH9..SZ... 16 halaman.
Automatic programming
If the previous setting from 1 to 5 is pressed in the
programming panel, the cooking time is reduced by one
minute, if it is held down the time is automatically reduced to
one minute.
If the previous setting from 6 to 10 is pressed in the
programming panel , the cooking time is increased by one
minute, if it is held down the time is automatically increased to
99 minutes.
Changing or cancelling the time
Press the
symbol of the desired hotplate. Change the
0
cooking time in the programming panel, or set to
Once the time has elapsed
The hotplate switches off. The beep sounds and the display
comes on
for 10 seconds. The
‹‹
Pressing the
symbol turns off the indicators and stops the
0
beeping.
Note: Any cooking time can be programmed up to 99 minutes.
Automatic time limitation
If the hotplate remains in use for a long time and no changes
are made in the settings, the automatic time limitation function
is triggered.
The hotplate stops heating. The
heat indicator
/
flash alternatively in the display.
œ
•
Cleaning lock function
Cleaning the control panel while the hob is on may change the
settings.
In order to avoid this, the hob has a cleaning lock function.
Press the
symbol. A signal sounds. The control panel is
#
Basic settings
The device has several basic settings. These settings may be
adapted to the user's individual needs.
Indicator
Function
™‚
Childproof lock
‹
Deactivated.*
Activated.
‚
Audible signals
™ƒ
Confirmation and error signals deactivated.
‹
Only confirmation signal deactivated.
‚
All signals activated.*
ƒ
Automatic programming of cooking time
™†
Switched off.*
‹
-
Automatic shut-off time
‚
ŠŠ
*Factory settings
.
‹‹
indicator lights up.
x
"‰
symbol and the residual
Timer
The timer can be set for periods of up to 99 minutes. It is
independent of the other settings. The hob must be switched
on. The timer can be set for any hotplate not turned on. This
function does not automatically switch off a hotplate.
How to program
Press the symbol
for the hotplate, the indicator
0
1.
turned on.
lights up in the time program function display.
‹‹
Select the desired time in the programming panel.
2.
The timer starts to count down after a few seconds.
Changing or cancelling the time
Press the
symbol of the desired hotplate. Change the
0
cooking time in the programming panel, or set to
Once the time has elapsed
A warning beep sounds. In the time program function display
‹‹
is shown, and the
W
indicator comes on. After 10 seconds
the indicators turn off.
Pressing the
symbol turns off the indicators and stops the
0
beep.
Note: When the timer is activated, the corresponding hotplate
is locked. First turn off the timer and then the hotplate.
The indicator goes out when any symbol is pressed. The
hotplate can now be reset.
When the automatic time function is used, it is governed by the
selected power level (from 1 to 10 hours).
locked for 35 seconds. The surface of the control panel can
now be cleaned without risk of changing the settings.
Note: The lock does not affect the main switch. The hob may
be switched off when desired.
is
W
‹‹
.
11