Siemens EH9..SZ... 사용 설명서 - 페이지 11

{카테고리_이름} Siemens EH9..SZ...에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens EH9..SZ... 16 페이지.

페이지 인쇄

Automatic programming

If the previous setting from 1 to 5 is pressed in the

programming panel, the cooking time is reduced by one

minute, if it is held down the time is automatically reduced to

one minute.

If the previous setting from 6 to 10 is pressed in the

programming panel , the cooking time is increased by one

minute, if it is held down the time is automatically increased to

99 minutes.

Changing or cancelling the time

Press the

symbol of the desired hotplate. Change the

cooking time in the programming panel, or set to

Once the time has elapsed

The hotplate switches off. The beep sounds and the display

comes on

for 10 seconds. The

‹‹

Pressing the

symbol turns off the indicators and stops the

beeping.

Note: Any cooking time can be programmed up to 99 minutes.

Automatic time limitation

If the hotplate remains in use for a long time and no changes

are made in the settings, the automatic time limitation function

is triggered.

The hotplate stops heating. The

heat indicator

flash alternatively in the display.

•

Cleaning lock function

Cleaning the control panel while the hob is on may change the

settings.

In order to avoid this, the hob has a cleaning lock function.

Press the

symbol. A signal sounds. The control panel is

Basic settings

The device has several basic settings. These settings may be

adapted to the user's individual needs.

Indicator

Function

™‚

Childproof lock

‹

Deactivated.*

Activated.

‚

Audible signals

™ƒ

Confirmation and error signals deactivated.

‹

Only confirmation signal deactivated.

‚

All signals activated.*

Automatic programming of cooking time

™†

Switched off.*

‹

Automatic shut-off time

‚

ŠŠ

*Factory settings

‹‹

indicator lights up.

"‰

symbol and the residual

Timer

The timer can be set for periods of up to 99 minutes. It is

independent of the other settings. The hob must be switched

on. The timer can be set for any hotplate not turned on. This

function does not automatically switch off a hotplate.

How to program

Press the symbol

for the hotplate, the indicator

turned on.

lights up in the time program function display.

‹‹

Select the desired time in the programming panel.

The timer starts to count down after a few seconds.

Changing or cancelling the time

Press the

symbol of the desired hotplate. Change the

cooking time in the programming panel, or set to

Once the time has elapsed

A warning beep sounds. In the time program function display

‹‹

is shown, and the

indicator comes on. After 10 seconds

the indicators turn off.

Pressing the

symbol turns off the indicators and stops the

beep.

Note: When the timer is activated, the corresponding hotplate

is locked. First turn off the timer and then the hotplate.

The indicator goes out when any symbol is pressed. The

hotplate can now be reset.

When the automatic time function is used, it is governed by the

selected power level (from 1 to 10 hours).

locked for 35 seconds. The surface of the control panel can

now be cleaned without risk of changing the settings.

Note: The lock does not affect the main switch. The hob may

be switched off when desired.

‹‹