Cisco 8832 Manual - Halaman 8

Jelajahi secara online atau unduh pdf Manual untuk Telepon IP Cisco 8832. Cisco 8832 30 halaman. Masergy ip conference phone
Juga untuk Cisco 8832: Panduan Utama Migrasi Firmware (31 halaman), Panduan Pengguna (20 halaman), Panduan Memulai Cepat (2 halaman), Panduan Instalasi (39 halaman), Panduan Memulai Cepat (16 halaman), Panduan Pemeliharaan (9 halaman), Mulai Cepat (2 halaman), Pengaturan (14 halaman), Panduan Memulai Cepat (2 halaman), Panduan Konfigurasi Ulang (2 halaman), Mulai Cepat (2 halaman), Manual (30 halaman)

Install the Wired Expansion Microphones

Procedure

Step 1

Reset service mode through Settings > Admin Settings > Reset Settings > Service mode.

Step 2

Press Select when prompted to change the service mode.

Step 3

Enter the service domain and press Continue.

Step 4

Enter your username and password.

Step 5

Select Sign in.

Install the Wired Expansion Microphones

The phone supports an optional kit with two wired expansion microphones. You can extend the microphones

up to 7 feet (2.13m) from the phone. For best results, we recommend that you place the microphones at least

3 feet (0.91m) away from the phone.

Procedure

Step 1

Plug the end of the microphone cable into the port on the side of the phone.

Step 2

Extend the microphone cable to the desired position.

The following figure shows installation of a wired expansion microphone.

Figure 5: Wired Expansion Microphone Installation