Cisco 8832 Panduan Memulai Cepat - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Telepon IP Cisco 8832. Cisco 8832 16 halaman. Masergy ip conference phone
Juga untuk Cisco 8832: Panduan Utama Migrasi Firmware (31 halaman), Panduan Pengguna (20 halaman), Panduan Memulai Cepat (2 halaman), Manual (30 halaman), Panduan Instalasi (39 halaman), Panduan Pemeliharaan (9 halaman), Mulai Cepat (2 halaman), Pengaturan (14 halaman), Panduan Memulai Cepat (2 halaman), Panduan Konfigurasi Ulang (2 halaman), Mulai Cepat (2 halaman), Manual (30 halaman)

Calls

• Forward busy—Forward an incoming call to a target phone number when the line is busy.

• Forward no answer—Forward an incoming call to a target phone number when the call isn't answered.

Verify that your calls are forwarded by looking for the call forwarding

middle top of the phone screen.

Procedure

Step 1

Press Forward.

Step 2

Select one of the following call forwarding services:

• Forward all

• Forward busy

• Forward no answer

Step 3

Do any of the following:

• Enter the target number, to which you want to forward incoming calls from this phone line.

• Press the Contacts softkey and select a contact from your contact directories.

Step 4

Press Call to forward all calls to the specified number.

Forward Calls with the Phone Web Page

Use the phone web page to set up your phone to forward calls.

You can also set up call forward on your phone screen.

Before you begin

Your administrator must enable the call forwarding services. Otherwise, the configuration on the phone web

page doesn't take effect.

Procedure

Step 1

On the phone web page, click User Login > Voice > User.

Step 2

In the Call Forward section, set the Cfwd All, Cfwd Busy, Cfwd No Answer, or combination of them to

Yes, and enter a phone number for each of the call forwarding services that you want to enable:

• Cfwd All/Cfwd All Dest—Forwards all calls.

• Cfwd Busy/Cfwd Busy Dest—Forwards calls only if the line is busy.

• Cfwd No Answer/Cfwd No Ans Dest—Forwards calls only if the line is not answered.

• Cfwd No Answer/Cfwd No Ans Delay—Assigns a response delay time in seconds.

Forward Calls with the Phone Web Page

icon in the line label or on the

Calls