Cisco 8832 Pengaturan - Halaman 6

Jelajahi secara online atau unduh pdf Pengaturan untuk Telepon IP Cisco 8832. Cisco 8832 14 halaman. Masergy ip conference phone
Juga untuk Cisco 8832: Panduan Utama Migrasi Firmware (31 halaman), Panduan Pengguna (20 halaman), Panduan Memulai Cepat (2 halaman), Manual (30 halaman), Panduan Instalasi (39 halaman), Panduan Memulai Cepat (16 halaman), Panduan Pemeliharaan (9 halaman), Mulai Cepat (2 halaman), Panduan Memulai Cepat (2 halaman), Panduan Konfigurasi Ulang (2 halaman), Mulai Cepat (2 halaman), Manual (30 halaman)

Enable Anonymous Call Blocking from the Phone Web Page

Procedure

Step 1

On the phone web page, select User Login > Advanced > Voice > User.

Step 2

Under Screen, select a duration for the Back Light Timer parameter.

Enable Anonymous Call Blocking from the Phone Web Page

Procedure

Step 1

On the phone web page, select User Login > Voice > User.

Step 2

Under Supplementary Services, set Block ANC Setting to Yes.

The setting applies to all lines, except for the ones where your administrator has enabled synchronization of

Anonymous Call Rejection between the lines and the BroadSoft XSI service.

Step 3

Click Submit All Changes.

Procedure

Step 1

On the phone web page, select User Login > Voice > User.

Step 2

Under Supplementary Services, set CW Setting to Yes.

The setting applies to all lines, except for the ones where your administrator has enabled synchronization of

Call Waiting between the lines and the BroadSoft XSI service.

Step 3

Click Submit All Changes.

You can block an incoming call that does not have caller information for a specific line or all lines.

If your administrator has enabled synchronization of Anonymous Call Rejection between a line and a BroadSoft

XSI service, then your setting only applies to the specific line instead of all lines. Typically, the setting applies

to all the lines, except for the ones where the synchronization is enabled.

Settings