Cisco 8832 Manual - Halaman 10

Jelajahi secara online atau unduh pdf Manual untuk Telepon IP Cisco 8832. Cisco 8832 30 halaman. Masergy ip conference phone
Juga untuk Cisco 8832: Panduan Utama Migrasi Firmware (31 halaman), Panduan Pengguna (20 halaman), Panduan Memulai Cepat (2 halaman), Manual (30 halaman), Panduan Instalasi (39 halaman), Panduan Memulai Cepat (16 halaman), Panduan Pemeliharaan (9 halaman), Mulai Cepat (2 halaman), Pengaturan (14 halaman), Panduan Memulai Cepat (2 halaman), Panduan Konfigurasi Ulang (2 halaman), Mulai Cepat (2 halaman)

Auto Provision Your Phone with Short Activation Code

Procedure

Step 1

Perform one of the following:

• After factory reset, your phone reboots and you see the Set password prompt on the phone.

• Press

Step 2

In the Set password screen, set the new password in the New password box.

After you create a new password, an unlock icon appears on the phone screen.

Auto Provision Your Phone with Short Activation Code

After your phone boots up, you see a welcome screen where you can enter the activation code. If you don't

have the activation code, contact your administrator.

Before you begin

Your administrator provides your activation code:

Procedure

Step 1

Press pound (#), and enter your activation code in the field that is provided on the Welcome screen.

Step 2

Press Continue.

The phone completes the provisioning process automatically.

Step 3

If an error message displays, enter the code again or contact your administrator.

Install the Wired Expansion Microphones

The phone supports an optional kit with two wired expansion microphones. You can extend the microphones

up to 7 feet (2.13m) from the phone. For best results, place the microphones between 3 feet (0.91 m) and 7

feet (2.1 m) away from the phone.

Procedure

Step 1

Plug the end of the microphone cable into the port on the side of the phone.

Your Phone

a. Select Status > Issues. If the phone has no user password that is created, you see a message No user

password provided and you see the Select softkey which lets you access the No user password

provided screen.

If the phone has user password, the value of the Issues menu is displayed as None.

b. Press Create.

Your Phone