Cisco 8841 Panduan Pengguna - Halaman 17

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Telepon IP Cisco 8841. Cisco 8841 30 halaman. Mpp phones
Juga untuk Cisco 8841: Catatan Rilis (24 halaman), Panduan Pengguna (16 halaman), Panduan Referensi Cepat (7 halaman), Fitur (16 halaman), Panduan Memulai dengan Cepat (2 halaman), Panduan Pengguna (2 halaman), Panduan Referensi Cepat (2 halaman), Panduan Referensi Cepat (2 halaman), Panduan Cepat (2 halaman), Panduan Referensi Cepat (6 halaman), Panduan Pengguna (24 halaman), Panduan Pengguna (28 halaman), Panduan Utama Migrasi Firmware (31 halaman), Panduan Pengguna (29 halaman), Manual (44 halaman), Panduan Memulai Cepat (2 halaman), Panduan Singkat (2 halaman), Panduan Memulai Cepat (2 halaman), Panduan Konfigurasi Ulang (2 halaman), Panduan Memulai Cepat (6 halaman), Manual (22 halaman), Memulai (2 halaman), Panduan Memulai Cepat (2 halaman), Manual (48 halaman), Panduan Pengguna (40 halaman), Mulai Cepat (2 halaman)

Halaman Cetak

Press *72 or Forward softkey

Step 2

When prompted, enter your PIN.

Step 3

Step 4 Press 1.

Step 5 When prompted, enter the destination phone number, starting with a 1, i.e. 1 800 555 1212.

Disable Call Forward – All Calls

Procedure

Lift the receiver and listen for dial tone

Step 1

Press *72 or Forward softkey

Step 2

When prompted, enter your PIN.

Step 3

Step 4 Press 2.

Forwarding of all calls is available remotely using the voicemail system. This feature can be accessed

Note:

remotely by dialing your phone number, and while listening to the voicemail greeting pressing the # key.

This will allow you to enter your PIN and access the voicemail system. In the Personal options menu (8),

you can enable call forwarding.

Enable Call Forward – Busy

Procedure

Lift the receiver and listen for dial tone

Step 1

Press *90

Step 2

When prompted, enter your PIN.

Step 3

Step 4 Press 1.

Step 5 When prompted, enter the destination phone number, starting with a 1, i.e. 1 800 555 1212.

Disable Call Forward – Busy

Procedure

Lift the receiver and listen for dial tone

Step 1

Press *90

Step 2

When prompted, enter your PIN.

Step 3

Step 4 Press 2.

Enable Call Forward – No Answer

Procedure

Lift the receiver and listen for dial tone

Step 1

Press *92

Step 2

When prompted, enter your PIN.

Step 3

17 |

P a g e

Cisco IP Phone 8800 Series User Guide