Cisco 8841 Panduan Pengguna - Halaman 18

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Telepon IP Cisco 8841. Cisco 8841 30 halaman. Mpp phones
Juga untuk Cisco 8841: Catatan Rilis (24 halaman), Panduan Pengguna (16 halaman), Panduan Referensi Cepat (7 halaman), Fitur (16 halaman), Panduan Memulai dengan Cepat (2 halaman), Panduan Pengguna (2 halaman), Panduan Referensi Cepat (2 halaman), Panduan Referensi Cepat (2 halaman), Panduan Cepat (2 halaman), Panduan Referensi Cepat (6 halaman), Panduan Pengguna (24 halaman), Panduan Pengguna (28 halaman), Panduan Utama Migrasi Firmware (31 halaman), Panduan Pengguna (29 halaman), Manual (44 halaman), Panduan Memulai Cepat (2 halaman), Panduan Singkat (2 halaman), Panduan Memulai Cepat (2 halaman), Panduan Konfigurasi Ulang (2 halaman), Panduan Memulai Cepat (6 halaman), Manual (22 halaman), Memulai (2 halaman), Panduan Memulai Cepat (2 halaman), Manual (48 halaman), Panduan Pengguna (40 halaman), Mulai Cepat (2 halaman)

Step 4 Press 1.

Step 5 When prompted, enter the destination phone number, starting with a 1, i.e. 1 800 555 1212.

Disable Call Forward – No Answer

Procedure

Lift the receiver and listen for dial tone

Step 1

Press *92

Step 2

When prompted, enter your PIN.

Step 3

Step 4 Press 2.

Enable Call Forward – Out of Service

Procedure

Lift the receiver and listen for dial tone

Step 1

Press *94

Step 2

When prompted, enter your PIN.

Step 3

Step 4 Press 1.

Step 5 When prompted, enter the destination phone number, starting with a 1, i.e. 1 800 555 1212.

Disable Call Forward – Out of Service

Procedure

Lift the receiver and listen for dial tone

Step 1

Press *94

Step 2

When prompted, enter your PIN.

Step 3

Step 4 Press 2.

Transfer Calls

You can transfer an active call to another person.

Transfer a Call to Another Person

When you transfer a call, you can stay on the original call until the other person answers. This gives you an

opportunity to talk privately with the other person before you remove yourself from the call. If you don't want to

talk, then transfer the call before the other person answers.

You can also swap between both callers to consult with them individually before you remove yourself from the

call.

Procedure

Step 1 From a call that is not on hold, press Transfer

Step 2 Enter the other person's phone number.

Step 3 (Optional) Wait until you hear the line ring or until the other person answers the call.

18 |

P a g e

Cisco IP Phone 8800 Series User Guide