Cisco 8851 Panduan Pengguna - Halaman 11

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Telepon IP Cisco 8851. Cisco 8851 11 halaman. Mpp
Juga untuk Cisco 8851: Catatan Rilis (24 halaman), Panduan Pengguna (15 halaman), Panduan Pengguna (16 halaman), Panduan Referensi Cepat (7 halaman), Fitur (16 halaman), Panduan Memulai dengan Cepat (2 halaman), Panduan Referensi Cepat (2 halaman), Panduan Cepat (2 halaman), Panduan Pengguna (24 halaman), Panduan Referensi Cepat (2 halaman), Panduan Pengguna (20 halaman), Panduan Memulai Cepat (2 halaman), Panduan Pengguna (28 halaman), Panduan Utama Migrasi Firmware (31 halaman), Panduan Pengguna (30 halaman), Panduan Pengguna (29 halaman), Manual (44 halaman), Manual (13 halaman), Manual (14 halaman), Panduan Memulai Cepat (2 halaman), Panduan Instalasi (39 halaman), Manual (5 halaman), Panduan Memulai Cepat (2 halaman), Panduan Singkat (2 halaman), Panduan Referensi Cepat (3 halaman), Panduan Memulai Cepat (2 halaman), Panduan Konfigurasi Ulang (2 halaman), Panduan Memulai Cepat (2 halaman), Panduan Memulai Cepat (6 halaman), Manual (22 halaman), Manual (22 halaman), Panduan Memulai Cepat (2 halaman), Memulai (2 halaman), Manual (48 halaman), Panduan Pengguna (40 halaman), Panduan Referensi Cepat (7 halaman), Mulai Cepat (2 halaman), Panduan Referensi Cepat (8 halaman)

Make sure that you replace Hostname or IP Address from this example with your PBXware's

'Hostname' or 'IP address'.

Click Submit and wait 35 seconds. The phone may reboot.

The auto-provisioning process will start during the phone's reboot process. The phone will pick

up an appropriate configuration file from PBXware. If everything is done as described above,

you should have successfully registered your phone to PBXware.

Configure BLF

This section describes how to configure BLF (Busy Lamp Field) for Cisco 8851.

Open a new browser window and enter the IP address in order to access the PBXware's web

administration login page. Example: http://192.168.1.10.

Edit an Extension

On the Extensions page, click the Edit icon corresponding to your Extension.

Click Advanced Options.

Navigate down to the Auto Provisioning and Presence group of settings.

Make sure that Auto Provisioning is set to Yes.

Make sure that Presence is set to "Yes".

Click Save.

Click Enhanced Services.

Click the Directory/BLF List check box.

Click the Save button in order to enable this feature.

Click the Directory/BLF List Edit button.

Enter the user Extension number.

Click the BLF check box.

Click Save.

Retrieved from "http://wiki.bicomsystems.com/Cisco_8851"

Disclaimers - About Bicom Systems Wiki