Cisco 8851 Panduan Memulai Cepat - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Telepon IP Cisco 8851. Cisco 8851 6 halaman. Mpp
Juga untuk Cisco 8851: Catatan Rilis (24 halaman), Panduan Pengguna (15 halaman), Panduan Pengguna (16 halaman), Panduan Referensi Cepat (7 halaman), Fitur (16 halaman), Panduan Memulai dengan Cepat (2 halaman), Panduan Referensi Cepat (2 halaman), Panduan Cepat (2 halaman), Panduan Pengguna (24 halaman), Panduan Referensi Cepat (2 halaman), Panduan Pengguna (20 halaman), Panduan Memulai Cepat (2 halaman), Panduan Pengguna (28 halaman), Panduan Utama Migrasi Firmware (31 halaman), Panduan Pengguna (30 halaman), Panduan Pengguna (29 halaman), Manual (44 halaman), Manual (13 halaman), Manual (14 halaman), Panduan Memulai Cepat (2 halaman), Panduan Instalasi (39 halaman), Manual (5 halaman), Panduan Memulai Cepat (2 halaman), Panduan Singkat (2 halaman), Panduan Referensi Cepat (3 halaman), Panduan Pengguna (11 halaman), Panduan Memulai Cepat (2 halaman), Panduan Konfigurasi Ulang (2 halaman), Panduan Memulai Cepat (2 halaman), Manual (22 halaman), Manual (22 halaman), Panduan Memulai Cepat (2 halaman), Memulai (2 halaman), Manual (48 halaman), Panduan Pengguna (40 halaman), Panduan Referensi Cepat (7 halaman), Mulai Cepat (2 halaman), Panduan Referensi Cepat (8 halaman)

Quick Start Guide for Cisco 8841 / 8851

Dialing



Dialing On-Hook: Enter a number, then go off-hook to complete the call by pressing speaker or lifting

the handset.



Dial 5 digits for internal calls. Dial 9 + number for local calls.



Dial 80 + 1 + area code + phone number, at beeps enter 6-digit access code for long distance calls.



Dial 80 + 011 + country code + city code + phone number, at beeps enter 6 digit access code for

international calls



Dial 911 for ANY Emergency calls



Redial: Press the Redial softkey to redial the last number called on your primary line. To redial on a

secondary line, press the line button first.

Answering



There are several ways to answer calls: lift the handset, press the flashing amber line button, press

the Answer softkey, or press the headset or speakerphone button.

Hold and Resume a Call



During a call, press the Hold button or the Hold softkey. The Hold icon will display and the line button

will flash green.



To resume the highlighted call, do one of these:

Press the flashing green session button

Press the Resume softkey

Press the Hold button



Start with an active call, not on hold.



Press the Transfer button or the Transfer softkey and enter the destination number.



Press the Transfer button or the Transfer softkey again to complete the transfer immediately – or wait

until the destination answers to announce the transfer, then press the button.



NOTE: to transfer a call directly to another Cisco user's voice mailbox, enter * plus the user's

extension as the destination number - i.e. *61234 .