Cisco 8851 Skrócona instrukcja obsługi - Strona 3

Quick Start Guide for Cisco 8841 / 8851

Dialing



Dialing On-Hook: Enter a number, then go off-hook to complete the call by pressing speaker or lifting

the handset.



Dial 5 digits for internal calls. Dial 9 + number for local calls.



Dial 80 + 1 + area code + phone number, at beeps enter 6-digit access code for long distance calls.



Dial 80 + 011 + country code + city code + phone number, at beeps enter 6 digit access code for

international calls



Dial 911 for ANY Emergency calls



Redial: Press the Redial softkey to redial the last number called on your primary line. To redial on a

secondary line, press the line button first.

Answering



There are several ways to answer calls: lift the handset, press the flashing amber line button, press

the Answer softkey, or press the headset or speakerphone button.

Hold and Resume a Call



During a call, press the Hold button or the Hold softkey. The Hold icon will display and the line button

will flash green.



To resume the highlighted call, do one of these:

Press the flashing green session button

Press the Resume softkey

Press the Hold button



Start with an active call, not on hold.



Press the Transfer button or the Transfer softkey and enter the destination number.



Press the Transfer button or the Transfer softkey again to complete the transfer immediately – or wait

until the destination answers to announce the transfer, then press the button.



NOTE: to transfer a call directly to another Cisco user's voice mailbox, enter * plus the user's

extension as the destination number - i.e. *61234 .