Cisco 8865 Panduan Pengguna - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Telepon IP Cisco 8865. Cisco 8865 30 halaman. Multiplatform phones
Juga untuk Cisco 8865: Fitur (16 halaman), Panduan Pengguna (24 halaman), Panduan Pengguna (28 halaman), Panduan Utama Migrasi Firmware (31 halaman), Panduan Pengguna (23 halaman), Manual (44 halaman), Manual (43 halaman), Manual (14 halaman), Panduan Instalasi (39 halaman), Panduan Konfigurasi Ulang (2 halaman), Panduan Memulai Cepat (2 halaman), Panduan Pengguna (13 halaman), Panduan Memulai Cepat (2 halaman), Panduan Pengguna (8 halaman), Manual (48 halaman), Manual (11 halaman), Panduan Pengguna (40 halaman), Panduan Memulai Cepat (2 halaman), Panduan Memulai Cepat (2 halaman)

USB Ports

Only for Cisco IP Phone 8851.

Your phone may have one or more USB ports. Each USB port supports a maximum of five USB devices.

Each

device connected to the port is included in the maximum device count.

For example, your phone can support five USB devices on the side port and five additional standard

USB devices

on the back port. Many third-party USB products contain more than one USB device, and thus

count as more than

If you use a USB hub and remove the USB cable from the phone during an active call, your

Note:

phone might

Bluetooth and Your Phone

Bluetooth is supported on Cisco IP Phone 8851.

If your phone supports Bluetooth, use a Bluetooth headset and connect your mobile phone or tablet to the phone.

Bluetooth connections work best when you're within 3 to 6 feet (1 to 2 meters) from your phone, but you might be

able to be as far away as 66 feet (20 meters). The Bluetooth connection can degrade if you have a barrier (wall,

door, window), large metal object, or other electronic devices between your phone and the connected device.

To connect a mobile device or headset to your phone with Bluetooth, start by pairing the device with your phone.

You can pair up to three devices. If you try to pair more than three devices, you are prompted to delete one

device.

After the headset or mobile device is paired, the phone connects to the headset or mobile device when the

headset or mobile device is turned on.

When you pair a device, you can set the Bluetooth mode to Phone, Handsfree or Both. Phone allows you to use

only a Bluetooth headset. Handsfree allows you to use only your mobile phone. Both allows you to use both a

headset and a mobile phone.

When you use a Bluetooth headset and mobile devices with your phone, keep these things in mind:

• The last Bluetooth headset or mobile device connected with the phone is the default device that the phone

uses.

• You can have only one active connection at any time. For example, you can have a Bluetooth headset or a

mobile phone active.

• The phone supports one device of each type. For example, you cannot connect two Bluetooth headsets.

• You can connect one mobile device at any time. For example, if your Bluetooth headset is active, and you

connect a mobile phone, the Bluetooth headset disconnects.

• Your Bluetooth device will reconnect if you move back into range, or if it restarts.

Energy Savings

Your administrator can reduce the amount of power that the phone screen uses when you're not using

your phone. Level of energy-saving that your administrator can set up:

• Power Save - The backlight or screen turns off when the phone has been inactive for a period of time.

7 |

P a g e

one device.

restart.

Cisco IP Phone 8800 Series User Guide