Cisco Aironet 521 Manual - Halaman 15

Jelajahi secara online atau unduh pdf Manual untuk Telepon IP Cisco Aironet 521. Cisco Aironet 521 35 halaman. Ip phones with multiplatform firmware
Juga untuk Cisco Aironet 521: Panduan Pengguna (46 halaman), Panduan Memulai Cepat (26 halaman), Manual (40 halaman), Panduan Administrasi (48 halaman), Panduan Instalasi (39 halaman), Manual (24 halaman)

Halaman Cetak

Step 2

Drill a 3/16 in. (4.7 mm) hole at the X mounting hole locations you

marked.

Step 3

If they are required, insert wall anchors into the mounting holes.

Step 4

If needed, drill or cut a cable access hole large enough for the

Ethernet cable and a power cable (if used) and pull the cables

through the access hole until you have about 1 ft. of exposed cables

protruding from the cable.

Note

Step 5

Position the mounting plate over the wall anchors or the drilled

holes.

Step 6

Insert two 8 x 32 x 1 in. pan head screws in the X mounted holes

and tighten.

Step 7

Attach the access point to the mounting plate.

Quick Start Guide: Cisco 521 Wireless Express Access Point

You can insert the Ethernet cable and the power cable (if

used) through the cable access notch in the access point

housing.