Cisco Aironet 521 Manuale - Pagina 15

Sfoglia online o scarica il pdf Manuale per Telefono IP Cisco Aironet 521. Cisco Aironet 521 35. Ip phones with multiplatform firmware
Anche per Cisco Aironet 521: Manuale d'uso (46 pagine), Manuale di avvio rapido (26 pagine), Manuale (40 pagine), Manuale di amministrazione (48 pagine), Manuale di installazione (39 pagine), Manuale (24 pagine)

Step 2

Drill a 3/16 in. (4.7 mm) hole at the X mounting hole locations you

marked.

Step 3

If they are required, insert wall anchors into the mounting holes.

Step 4

If needed, drill or cut a cable access hole large enough for the

Ethernet cable and a power cable (if used) and pull the cables

through the access hole until you have about 1 ft. of exposed cables

protruding from the cable.

Note

Step 5

Position the mounting plate over the wall anchors or the drilled

holes.

Step 6

Insert two 8 x 32 x 1 in. pan head screws in the X mounted holes

and tighten.

Step 7

Attach the access point to the mounting plate.

Quick Start Guide: Cisco 521 Wireless Express Access Point

You can insert the Ethernet cable and the power cable (if

used) through the cable access notch in the access point

housing.