Cisco SPA 303 Manual Isi Paket - Halaman 3

Jelajahi secara online atau unduh pdf Manual Isi Paket untuk Telepon IP Cisco SPA 303. Cisco SPA 303 7 halaman. 3–line ip phone
Juga untuk Cisco SPA 303: Panduan Memulai Cepat (2 halaman), Panduan Memulai Cepat (5 halaman), Panduan Memulai Cepat (6 halaman), Panduan Admin (6 halaman), Panduan Memulai Cepat (21 halaman), Mengenal (3 halaman)

Setting up Cisco SPA 303 3

* Ensure that the phone is powered-up and connected to the Internet.

1. Verify the device's IP address.

Press [Setup] button à Scroll to [Network] and press [Select] à The IP Address is displayed

under [Current IP].

2. Open Settings Page on Web Browser.

Cisco SPA 303 3 and PC's network connection should be the same. Type the IP address on the

Web browser field on a local PC. [Format:

(192.168.001.002) à Type (http://192.168.1.2)]

* If you have trouble accessing the configuration utility, perform the following steps:

Press [Setup] button on the phone.

II.

Select [Network].

III.

Scroll to [Enable Web Server] and make sure that it is set to [Yes]. If not, press

the [Edit] soft key and press [y/n] soft key to set it to [Yes].

IV.

Press [OK], then press [Save].

3. Settings Page will automatically be displayed. Click [Admin Login] à Click [Advanced] à

Click [System] tab.

4. Click [Regional] tab.

http://IPAddress

à Example: Phone IP Address

Primary NTP Server and

Secondary NTP Server:

Enter

[ntp.jst.mfeed.ad.jp].

Time Zone: Select your

time zone (e.g. GMT

+09:00].