Cisco SPA 303 Contenuto della confezione Manuale - Pagina 3

Sfoglia online o scarica il pdf Contenuto della confezione Manuale per Telefono IP Cisco SPA 303. Cisco SPA 303 7. 3–line ip phone
Anche per Cisco SPA 303: Manuale di avvio rapido (2 pagine), Manuale di avvio rapido (5 pagine), Manuale di avvio rapido (6 pagine), Manuale dell'amministratore (6 pagine), Manuale di avvio rapido (21 pagine), Conoscere (3 pagine)

Setting up Cisco SPA 303 3

* Ensure that the phone is powered-up and connected to the Internet.

1. Verify the device's IP address.

Press [Setup] button à Scroll to [Network] and press [Select] à The IP Address is displayed

under [Current IP].

2. Open Settings Page on Web Browser.

Cisco SPA 303 3 and PC's network connection should be the same. Type the IP address on the

Web browser field on a local PC. [Format:

(192.168.001.002) à Type (http://192.168.1.2)]

* If you have trouble accessing the configuration utility, perform the following steps:

Press [Setup] button on the phone.

II.

Select [Network].

III.

Scroll to [Enable Web Server] and make sure that it is set to [Yes]. If not, press

the [Edit] soft key and press [y/n] soft key to set it to [Yes].

IV.

Press [OK], then press [Save].

3. Settings Page will automatically be displayed. Click [Admin Login] à Click [Advanced] à

Click [System] tab.

4. Click [Regional] tab.

http://IPAddress

à Example: Phone IP Address

Primary NTP Server and

Secondary NTP Server:

Enter

[ntp.jst.mfeed.ad.jp].

Time Zone: Select your

time zone (e.g. GMT

+09:00].