Ricoh SP 311SFNw Panduan Memulai - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Memulai untuk Semua dalam Satu Printer Ricoh SP 311SFNw. Ricoh SP 311SFNw 47 halaman. Network settings guide
Juga untuk Ricoh SP 311SFNw: Panduan Instalasi Cepat (2 halaman), Spesifikasi (4 halaman), Spesifikasi (4 halaman), Panduan Instalasi (2 halaman)

Halaman Cetak

Connect Printer

STEP 2

This section explains how to connect the printer to your computer based on the

setup method you selected in

2.1 USB Connection

USB cable

directly connects the printer to your computer. Even if the computer that you are connecting

is networked, you can still connect the printer according to the procedures outlined below.

To make a USB connection, proceed as follows:

1. Turn printer power switch Off.

2. Insert USB cable (rectangular plug) firmly into computer's USB port.

3. Before inserting the USB cable (square plug) into the printer's USB port, install the

USB Printer/Scanner drivers. See

Note:

During software installation, you will be prompted to connect the USB cable (square plug) to your

•

printer, and turn the printer on.

2.2 Network Connection

Network connections include wired and wireless...

2.2.1 Wired (Ethernet) Connection

In a wired configuration, a network (Ethernet) cable connects the printer to your network hub (router)

or switch.

To make a wired connection, proceed as follows:

1. Confirm that printer's power switch is Off.

2. Plug network cable into printer's Ethernet port.

Important:

The printer cannot connect to a wired (Ethernet) network and wireless LAN network

•

simultaneously.

3. Turn printer power switch On.

4. Next, install the Network Printer/Scanner drivers. See

RICOH SP 311SFNw B&W Multifunction Laser Printer

1.2 Choose Setup

Method.

3.1 USB Quick

Install.

3.2 Network Quick

Getting Started Guide

Install.