Cisco SPA300 Series Kartu Referensi Cepat - Halaman 2
Jelajahi secara online atau unduh pdf Kartu Referensi Cepat untuk Telepon IP Cisco SPA300 Series. Cisco SPA300 Series 2 halaman. Configure ring type
Juga untuk Cisco SPA300 Series: Panduan Pengguna (38 halaman), Panduan Pengguna (12 halaman), Kartu Referensi Cepat (2 halaman), Panduan Memulai Cepat (2 halaman), Panduan Memulai Cepat (3 halaman), Panduan Memulai Cepat (3 halaman), Buku Petunjuk (3 halaman), Manual (2 halaman), Manual (2 halaman), Panduan Pengguna Cepat (2 halaman)
Halaman Cetak
Monitoring Calls on a Shared Line or
Shared Extension
The line button shows the status of the line.
•
Unlit: Idle.
•
Green (steady): Connected to a call on this phone.
•
Green (flashing): Holding a call on this phone. To
resume the call, press the phone button.
•
Orange (flashing): Ringing.
•
Red (steady): Connected to a call on another
user's phone.
•
Red (flashing): Holding a call on another user's
phone. To pick up the call, press the line button.
•
Orange (steady): There is an error. Contact your
phone administrator for assistance.
Parking and Unparking Calls
•
SPA301 and SPA501G:
–
Park a call: Place the call on hold. Press
3
8
*
. Enter an easily remembered
number for your park slot. Press
–
Unpark a call: Lift the handset. Press
3
9
*
. Enter the park slot number.
#
Press
.
•
Other models:
–
Park a call: Press the right-arrow
navigation button and then press
Park
. Enter an easily remembered
number for your park slot. Press
Dial
.
–
Unpark a call: Press the right-arrow
navigation button, and then press
Enter the park slot number. Press
Dial
.
Your phone administrator also may configure a
N
OTE
Park Slot feature button for your phone. See Using
Feature Buttons.
Picking Up a Call for Another User
Not available on SPA301 or SPA501G
•
If you know the extension number:
Press
Pickup
. Enter the extension number.
Dial
Press
.
•
Choose a call from a list of ringing calls at your
site: Press the right-arrow navigation button, and
then press
GrPick
or
Grpickup
navigation button to choose a call, and then press
Dial
.
Diverting Calls to Voicemail
•
Ignore a ringing call: Press
forwarded to your Call Forward No Answer
number (usually voicemail).
•
Prevent new calls from ringing your phone:
Press
Call Forward No Answer number (usually
voicemail). To clear, press
Forwarding Calls to Another Number
•
Forward all incoming calls: Press
Cfwd
an extension or phone number. Press
(not required if you entered an extension).
•
Cancel Call Forward All: Press
-Cfwd
Using the Site Directory
To find extension numbers for users, groups, and
#
.
system features, press
Use the navigation button to choose a
directory. To place a call, select a number, and
then press
Using Feature Buttons
Your phone administrator may configure feature
buttons for your phone. Ask your phone administrator
for details.
#
or
Not available on SPA301, SPA501G, or SPA502G
•
Auto-dial (system speed dial): Immediately calls
or transfers a call to the specified extension or
Unpark
.
phone number.
#
or
•
BLF (Busy Lamp Field): Monitors the specified
extension. Also can be used as an auto-dial
(system speed dial).
•
Block Caller ID: Blocks your caller ID for a new call.
Lasts for the duration of the call.
•
Park Slot: Places a call on hold in the specified
park slot. To unpark, press the same park slot
button, such as Park Slot 2, on any IP phone with
this button. Note: The call also can be unparked
from any phone as described in Parking and
Unparking Calls.
•
Force Night: The function depends on the Day/
Night settings for your phone system.
. Use the
–
In a manual day/night system: Press to
toggle between Day mode (green) and Night
mode (red).
Ignore
. The call is
Dnd
. All calls are forwarded to your
-Dnd
or
Clr Dnd
Forward
to forward all incoming calls. Then enter
Dial
Clr Fwd
or
.
Dir
Directory
or
.
Dial
.
–
In an automated day/night system: Press to
temporarily override the schedule. The light is
red. Press again to resume the normal
schedule. The light is green.
•
Intercom: Initiates a two-way call to the phone
speaker of the specified user. To end the intercom
call, press the button again.
•
Individual Pickup: Flashes to indicate a ringing call
.
on the specified extension. Press to pick up the
call.
•
Unused Button: May be used for a personal
or
speed dial button.
Press and hold the unused button for 3 to 4
seconds. To enter the Name, repeatedly press the
corresponding key on the keypad until the desired
letter appears. To erase a character, press
delChar
. When finished, press the down-arrow
navigation button to select the PhoneNo field.
Enter an extension or phone number, including any
required access code. Finally, press
Using Star Codes
Select a star code from a list:
•
Cisco SPA50xG models (except SPA501G): Lift
the handset, or select the speaker or headset.
Press the right-arrow navigation button until the
*code
softkey appears. Press
Press the down-arrow navigation button to select
a star code. Press
may appear.
•
Cisco SPA525G/G2: Lift the handset, or select the
speaker or headset. Press Option, and then select
Input Star Code. Press the down-arrow navigation
button to select a star code. Press
Additional prompts may appear.
•
Enter a code manually (all models): Lift the
handset, or select the speaker or headset. Press
*
, followed by the code. (For details, see your
phone user guide.)
Where to Go from Here
Cisco Small Business Support Community:
www.cisco.com/go/smallbizsupport
Additional Phone Documentation:
•
Cisco SPA300 Series Phones:
www.cisco.com/go/300phones
•
Cisco SPA500 Series Phones:
www.cisco.com/go/spa500phones
Save
.
*code
.
*code
. Additional prompts
Select
.