Cisco Unified 7905G Mengkonfigurasi Pengaturan Jaringan - Halaman 18

Jelajahi secara online atau unduh pdf Mengkonfigurasi Pengaturan Jaringan untuk Telepon IP Cisco Unified 7905G. Cisco Unified 7905G 34 halaman. Ip talk series
Juga untuk Cisco Unified 7905G: Panduan Pengguna (21 halaman), Lembar data (5 halaman), Panduan Pengguna (25 halaman), Panduan Telepon (46 halaman), Referensi Cepat (2 halaman), Panduan Pengguna (20 halaman), Panduan Referensi (20 halaman)

Halaman Cetak
Cisco Unified 7905G Mengkonfigurasi Pengaturan Jaringan
Configuring IP Settings
Note

Assigning an IP Address

Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 4.2, Cisco Unified IP Phone
4-18
You can use 0.0.0.0 for the subnet mask only if the default gateway is also
•
0.0.0.0.
Ensure the TFTP server has an IP address.
•
Ensure the default gateway IP address is on the same subnet as the host IP
•
address.
Procedures involved in configuring IP settings or TFTP options cannot be
completed when DHCP is enabled in your network.
This section covers the following topics:
Assigning an IP Address, page 4-18
•
•
•
•
•
The IP address is the unique logical address identifying each host computer, or
node, on a TCP/IP network. An IP address is a 32-bit number expressed as four
decimal numbers from 0 to 255 separated by periods.
Before you can assign an IP address, you must disable DHCP. For instructions,
see the
"Disabling DHCP" section on page
To assign an IP address for the Cisco Unified IP Phone, follow these steps:
In the pane on the left under Change Configuration, click Network Parameters.
Chapter 4
Configuring Network Settings on the Cisco Unified IP Phone
4-15.
4-2.
OL-8617-01