Ricoh Ri 100 Panduan Cepat - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Cepat untuk Printer Ricoh Ri 100. Ricoh Ri 100 4 halaman. Direct to garment (dtg) printer
Juga untuk Ricoh Ri 100: Catatan (12 halaman), Manual Informasi Keselamatan (24 halaman), Panduan Pemeliharaan (12 halaman), Panduan Instalasi Cepat (4 halaman), Panduan Cepat (4 halaman), Panduan Instalasi Cepat (23 halaman), Catatan Untuk Pengguna (32 halaman)

Loading the fabric in the cassette

For details, refer to User's Guide provided with the printer Ri 100.

You can shorten the processing time by putting a garment in the cassette while pre-

heating the finisher.

Smoothing wrinkles/flattening fibers (Press

➊

Press the [Power] key to turn on the power.

➋

Make sure the mode switching lever is set in the

center.

➌

Set the temperature of the heater.

Set the temperature according to the fabric on

which you are printing. The default setting is "High".

➍

When the [Preheat] key is lit, press the [Preheat]

key to start preheating.

When the [Preheat] key is unlit, no operation is

necessary because preheating is completed.

➎

Press the [Stop/Unlock] key for 1 second or

more to open the cover. When set to the profes-

sional mode, it is not necessary to hold down

the [Stop/Unlock] key.

➏

➐

➑

When you move the mode switching lever to the

left, processing starts. An alarm sounds after

preheating is completed.

➒

❿

Confirm that the mode indicator light is off.

⓫

Press the [Stop/Unlock] key for 1 second or

more to open the cover. When set to the profes-

sional mode, it is not necessary to hold down

the [Stop/Unlock] key.

⓬

⓭

)