Ricoh Ri 100 빠른 매뉴얼 - 페이지 2
{카테고리_이름} Ricoh Ri 100에 대한 빠른 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh Ri 100 4 페이지. Direct to garment (dtg) printer
Ricoh Ri 100에 대해서도 마찬가지입니다: 참고 (12 페이지), 안전 정보 매뉴얼 (24 페이지), 유지 관리 매뉴얼 (12 페이지), 빠른 설치 매뉴얼 (4 페이지), 빠른 매뉴얼 (4 페이지), 빠른 설치 매뉴얼 (23 페이지), 사용자를 위한 참고 사항 (32 페이지)
페이지 인쇄
1
Loading the fabric in the cassette
For details, refer to User's Guide provided with the printer Ri 100.
You can shorten the processing time by putting a garment in the cassette while pre-
heating the finisher.
2
Smoothing wrinkles/flattening fibers (Press
➊
Press the [Power] key to turn on the power.
➋
Make sure the mode switching lever is set in the
center.
➌
Set the temperature of the heater.
Set the temperature according to the fabric on
which you are printing. The default setting is "High".
➍
When the [Preheat] key is lit, press the [Preheat]
key to start preheating.
When the [Preheat] key is unlit, no operation is
necessary because preheating is completed.
➎
Press the [Stop/Unlock] key for 1 second or
more to open the cover. When set to the profes-
sional mode, it is not necessary to hold down
the [Stop/Unlock] key.
➏
➐
➑
When you move the mode switching lever to the
left, processing starts. An alarm sounds after
preheating is completed.
➒
❿
Confirm that the mode indicator light is off.
⓫
Press the [Stop/Unlock] key for 1 second or
more to open the cover. When set to the profes-
sional mode, it is not necessary to hold down
the [Stop/Unlock] key.
⓬
⓭
)