Ricoh SP3 Buletin Teknis - Halaman 10

Jelajahi secara online atau unduh pdf Buletin Teknis untuk Printer Ricoh SP3. Ricoh SP3 28 halaman.

Halaman Cetak

Model:

SP3

Subject:

Software Upgrade Procedure Revision

From:

QAC Field Information Dept.

Classification:

This bulletin describes the revision of the upgrade procedure for the SP3 printer controller

software.

If the SP3 printer controller software must be upgraded in the field, please use the

following procedure. New upgrade program files (SCOPY.BAT, FCOPY.EXE and

TIMER.EXE) will be use to upgrade the new system software.

Please modify the section "Download New System Software" (from page 4-4) of the

technical manual for the Printer/Scanner Controller Options.

Technical Manual for the Printer /Scanner Controller

2.3 DOWNLOAD NEW SYSTEM SOFTWARE

Download New System Software is used to update the controller system software from a

personal computer through a parallel cable.

Preparation

• Provide a DOS based computer with a parallel port (LPT1 is used by default)

NOTE: MS-DOS or PC-DOS is required on the PC.

• Provide a standard parallel cable to connect the computer to the SP3.

• Provide new system software to download from the computer

• Provide the SCOPY programs under one directory (command files and BAT file).

i.e.

C:\SCOPY(directory)\SCOPY.BAT

All these three files are required to download the system software.

echnical

Troubleshooting

Mechanical

Paper path

Other (

)

FCOPY.EXE

TIMER.EXE

ulletin

Date:

15-Mar-98

Prepared by:

Part information

Electrical

Transmit/receive

PAGE: 1/3

No:

A.Tokoyama

Action required

Service manual revision

Retrofit information