Ricoh SP3 Boletim Técnico - Página 10
Procurar online ou descarregar pdf Boletim Técnico para Impressora Ricoh SP3. Ricoh SP3 28 páginas.
Imprimir páginaModel:
SP3
Subject:
Software Upgrade Procedure Revision
From:
QAC Field Information Dept.
Classification:
This bulletin describes the revision of the upgrade procedure for the SP3 printer controller
software.
If the SP3 printer controller software must be upgraded in the field, please use the
following procedure. New upgrade program files (SCOPY.BAT, FCOPY.EXE and
TIMER.EXE) will be use to upgrade the new system software.
Please modify the section "Download New System Software" (from page 4-4) of the
technical manual for the Printer/Scanner Controller Options.
Technical Manual for the Printer /Scanner Controller
2.3 DOWNLOAD NEW SYSTEM SOFTWARE
Download New System Software is used to update the controller system software from a
personal computer through a parallel cable.
Preparation
• Provide a DOS based computer with a parallel port (LPT1 is used by default)
NOTE: MS-DOS or PC-DOS is required on the PC.
• Provide a standard parallel cable to connect the computer to the SP3.
• Provide new system software to download from the computer
• Provide the SCOPY programs under one directory (command files and BAT file).
i.e.
C:\SCOPY(directory)\SCOPY.BAT
All these three files are required to download the system software.
T
echnical
Troubleshooting
Mechanical
Paper path
Other (
)
FCOPY.EXE
TIMER.EXE
B
ulletin
Date:
15-Mar-98
Prepared by:
Part information
Electrical
Transmit/receive
PAGE: 1/3
No:
7
A.Tokoyama
Action required
Service manual revision
Retrofit information