Cisco Unified 8961 Manual - Halaman 3

Jelajahi secara online atau unduh pdf Manual untuk Telepon IP Cisco Unified 8961. Cisco Unified 8961 12 halaman. Cisco systems telephone
Juga untuk Cisco Unified 8961: Catatan Rilis (16 halaman), Ikhtisar (30 halaman), Setup Manual (4 halaman), Panduan Administrasi (8 halaman), Panduan Pengguna (48 halaman), Panduan Pengguna (10 halaman), Fitur (35 halaman), Mulai Cepat (2 halaman), Panduan Pengguna (22 halaman), Pengaturan (4 halaman), Panduan Memulai Cepat (2 halaman), Panduan Referensi Cepat (3 halaman), Referensi Cepat (4 halaman), Sekilas (3 halaman), Panduan Cepat (10 halaman), Panduan Memulai Cepat (2 halaman), (Bahasa Portugis) Panduan Memulai Cepat (2 halaman)

Halaman Cetak
Cisco Unified 8961 Manual

Phone Screen

The way that your system administrator set up your phone determines what is displayed on your phone screen.
1
Line Label
2
Header
Session button label
3
(for connected call)
Session button label
4
(for held call)
5
New Call icon
6
Softkeys
►Handset, Spearkerphone and Headset volume
1. To increase or decrease the volume of your handset, speaker or headset during a call or after invoking dial tone, press the up
or down
speaker or headset). Volume level is automatically saved until you change it again.

►Adjusting the Ringer volume

1. Press the up or down Volume button
buttons are off. Press the Volume
volume is saved automatically.
Displays the line phone information
Displays the date and time, and information (such as phone number) about the selected
line.
Display information (such as phone number and duration) about a connected call on the
line.
Displays information (such as phone number and duration) about a held call on the line.
Indicates you can press the corresponding session button to make a new call.
Softkey options for the selected (highlighted) call only.
If you select a different call (by pressing a feature button or the Navigation pad, or by answering a
ringing call), the softkey options may change.
(
Volume) button. The Volume button adjusts the volume for the currently active condition (handset,
button repeatedly until you reach the desired volume level. The new ringer
while the handset is in the cradle and the headset and speakerphone
3