Cisco 1751 Panduan Memulai Cepat - Halaman 17

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Router Jaringan Cisco 1751. Cisco 1751 35 halaman. Modular access router
Juga untuk Cisco 1751: Ikhtisar Solusi (16 halaman), Lembar data (19 halaman)

Halaman Cetak

The telephone numbers used in this guide are only examples and are invalid for public use in the United

Note

States. When you configure your network, be sure to substitute your own telephone numbers.

To configure the router with the dial-peer information in

configuration commands:

West> enable

Password:

West# configure terminal

West(config)# dial-peer voice 401 pots

West(config-dial-peer)# destination-pattern 14085553737

West(config-dial-peer)# port 0/0

West(config)# dial-peer voice 402 pots

West(config-dial-peer)# destination-pattern 14085554141

West(config-dial-peer)# port 0/1

West(config-dial-peer)# exit

West(config)#

These commands are summarized in

Figure 12

The dial-peer command always takes the argument voice. The number following it is the dial-peer tag,

and pots is the type of dial peer.

Cisco IOS software refers to a telephone number as a destination pattern because it is the destination for

an incoming or outgoing call. Enter these numbers with the destination-pattern command. A

destination pattern can include asterisks (*) and pound signs (#) from the telephone keypad, and commas

(,) and periods (.), which have special meanings. Parentheses ( () ), hyphens (-), slashes (/), and spaces

( ), which are often used to make telephone numbers easier for humans to read, are not allowed.

Notice that the commands in the examples puts the prefix 1 (used in the United States to indicate a

long-distance number) and an area code in front of the remaining numbers to complete the destination

pattern. You need to include similar codes for your country if the VoIP equipment needs to establish a

connection to the PSTN.

The Cisco IOS software does not check the validity of the telephone number. It accepts any string of

Note

permitted characters as a valid number.

The business that owns the West router also has a branch office in the East.

office network, and

78-11259-05

Figure

West Router Configured for Local Dial Peers

dial-peer voice 401 pots

destination-pattern 14085553737

port 0/0

FXS VIC

0/0

West

FXS VIC

0/1

dial-peer voice 402 pots

destination-pattern 14085554141

port 0/1

Table 8

lists the phone numbers, voice ports, and dial-peer tags for this office.

Table

7, enter the following global

12.

IP cloud

Cisco 1751 Voice-over-IP Quick Start Guide

Configuring Voice-over-IP

Figure 13

shows the East