Epson EMP-830 Panduan Referensi Cepat - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Referensi Cepat untuk Proyektor Epson EMP-830. Epson EMP-830 20 halaman. Esc/vp21 command user's guide for business projectors
Juga untuk Epson EMP-830: Panduan Pengoperasian (36 halaman), Panduan Pengguna (24 halaman), Lembar Spesifikasi (3 halaman), Panduan Pengguna (25 halaman), Brosur & Spesifikasi (4 halaman), Panduan Pengguna (25 halaman), Panduan Pengguna (28 halaman), Panduan Pengguna (28 halaman)

Adjusting projected

images

(If setting up the projector for

the first time or after moving

it)

Adjusting the projection angle

Foot adjust lever

If tilted horizontally, adjust using the left

and right rear adjustable feet.

Rear

adjustable

foot

Extend

Retract

While pulling the foot adjust lever, lift up the front of the

projector so that the front adjustable foot can extend. The Auto

"V-Keystone" function will operate when the projector is tilted.

To retract the front adjustable foot, gently push down on the

projector while pulling the foot adjust lever.

User's Guide

"Adjusting the Position and Size of the Projection Area"

If the height of the images is reduced after

vertical keystone correction, run Quick Setup

as described on the next page, or adjust the

height manually using the following procedure.

For adjustment using the configuration menus:

"Setting" - "Keystone" -"H/V-Keystone" -

"Horz./Vert./Height" - "Height"

User's Guide

"Manually Correcting Projection Area Distortion"