Epson EMP-830 Panduan Referensi Cepat - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Referensi Cepat untuk Proyektor Epson EMP-830. Epson EMP-830 20 halaman. Esc/vp21 command user's guide for business projectors
Juga untuk Epson EMP-830: Panduan Pengoperasian (36 halaman), Panduan Pengguna (24 halaman), Lembar Spesifikasi (3 halaman), Panduan Pengguna (25 halaman), Brosur & Spesifikasi (4 halaman), Panduan Pengguna (25 halaman), Panduan Pengguna (28 halaman), Panduan Pengguna (28 halaman)

The followings show how the projection area is adjusted by the Auto Quick Corner.

Before

After

The Auto Quick Corner works properly by doing the following beforehand.

When the "Projection" menu is set to "Front", adjust the projection area so that the top edge of the screen frame is inside the area.

When the "Projection" menu is set to "Front/Ceiling", adjust the projection area so that the bottom edge of the screen frame is

inside the area.

Turning the Projector Off

Turn off the equipment that is connected to the projector.

Press

twice to

turn the projector's

power off.

Simple!

"Direct Power OFF" function

lets you turn the power off by a

circuit breaker or by

disconnecting the power cable

without pressing

When 3 or more sides

When top and bottom sides, or

are detected

2 adjacent sides are detected

After using the projector, you can disconnect the power cable and move the

projector straight away.

When the screen is

wider than the image

If the message "The projector is overheating. Clean or

replace the air filter and lower the room temperature."

appears during projection of images, press

power off and then clean or replace the air filters.

User's Guide "Cleaning the Air Filters and Air lntake

Vent" "Replacing the Air Filters"

Set the remote control [R/C] switch to "OFF" after use.

The battery life will be reduced if it is left "ON"

unnecessarily.

When no borders

are detected

User's Guide "Turning the Projector Off"

to turn the

8 8