Epson EMP-TW10H Panduan Referensi Cepat - Halaman 2
Jelajahi secara online atau unduh pdf Panduan Referensi Cepat untuk Proyektor Epson EMP-TW10H. Epson EMP-TW10H 4 halaman. Esc/vp21 command user's guide for home projectors
Juga untuk Epson EMP-TW10H: Spesifikasi (1 halaman), Panduan Pengguna (9 halaman)
Halaman Cetak
Turning on the Projector
c
Turn off the power of the projector and the equipment you are connecting to.
Connect the video equipment.
Remove the lens cover.
Attach the power cable to the projector.
Insert the power plug into a wall socket.
The power indicator lights orange.
Turn on the power of the video equipment.
If connected to a video source, start playback.
Press the [Power] button.
The projector beeps and the power supply indicator begins to
blink green.
Wait until the power indicator lights green.
It takes about 40 seconds.
Selecting the Input Source
Select the images to be projected.
Projector
The input source changes whenever
the [Source] button is pressed.
* Switching between Input A RGB-Video and Component Video is
carried out in the "Setting" → "Input Signal" → "Input A"
configuration menu.
When set to Component Video, the projector automatically
determines whether a YCbCr or YPbPr signal is being input.
Turning off the Projector
Turn off the power to the video equipment.
Press the [Power] button.
A confirmation screen is displayed.
The confirmation screen disappears if anything other than
p
the [Power] button is pressed, or if nothing is pressed for 7
seconds.
Remote control
The input source changes whenever
the [Input A/B] button is pressed.
c
1
5
Play!
6
The input source changes whenever the
If two or more sources are connected, be sure to swap the
p
audio cables between the connected equipment, when
necessary.
Press the [Power] button again.
The power indicator begins to blink.
Wait until the power indicator lights orange and the
projector beeps twice.
Cool-down takes place. It takes about 20 seconds.
Unplug the projector from the outlet.
Do not remove the plug while the power indicator is blinking,
or this may damage the projector.
2
4
3
Power indicator
[S-Video/Video] button is pressed.