Epson EMP-TW10H Panduan Referensi Cepat - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Referensi Cepat untuk Proyektor Epson EMP-TW10H. Epson EMP-TW10H 4 halaman. Esc/vp21 command user's guide for home projectors
Juga untuk Epson EMP-TW10H: Spesifikasi (1 halaman), Panduan Pengguna (9 halaman)

Halaman Cetak

Adjusting the Display

Adjusting the projection angle

Set up the projector so that it is at right angles to a screen.

Seen from the side

Centre of lens

If it is not possible to set up the projector so that it is at right

angles to a screen, it can be set up at a slight vertical angle

instead. (Max 10°)

The projector's adjustable feet are designed to turn in

different directions. This lets you raise the projector by

standing behind it and rotating the feet outward with both

hands.

Adjusting the projection size

The size of the projected image is basically determined by

the distance from the projector to the screen. s "Projection

distance and screen size" User's Guide

Turn the zoom ring to adjust the size

of the projected image.

The image can be enlarged up to 1.54

times its original size.

If you would like to enlarge the image

further, move the projector further away from the screen.

Getting the Most Out of Your Home Theatre

Selecting a colour mode

There are four preset colour modes available for use.

Make a selection appropriate to the conditions in which you are projecting.

The colour mode changes each time you press the [Color Mode] button on the remote control.

When Theatre or Theatre Black is selected, the EPSON cinema filter is automatically activated, adjusting the tone of the image to the

optimal settings for movies.

A/V Mute

Temporarily stops the image and sound.

Press the [A/V Mute] button on the remote

control.

The sound and image disappear.

Projection is resumed when you press the [A/V

Mute] button again or press the [Esc] button.

• The screen colour during A/V Mute can be set to black or

blue. The default setting is black. ([Menu] button →

"Setting" → "On Screen Display" → "Background Color")

• When activated while projecting moving images, the sound

and image will continue to be played back by the source,

so it will not be possible to return to the point where A/V

Mute was activated.

Seen from above

Best for projecting video games.

Best for projecting sports, etc.

Best for watching movies with a generally bright feel.

Best for watching movies in a pitch black environment.

Keystone

When the projector is not set at right angles to a screen, the

display distorts in the shape of a trapezoid. This distortion

can be corrected.

• You can correct only vertical distortion with this function.

Horizontal distortion cannot be corrected.

• If the text part of the image is blurred after keystone

correction is carried out, decrease the sharpness setting.

Press the [v] or [w] buttons.

Images can be corrected without distortion when the projector is

tilted to a maximum of ±15°.

Setting the focus

Turn the focus ring to adjust the image focus.

If the projector is positioned

outside the normal projecting

range of 73-1165 cm (2.4-38.2 ft.),

it may not be possible to obtain the

correct focus. If you have trouble

obtaining the correct focus, check

the projection distance.

Freeze

Pauses the projected images.

Press the [Still] button on the remote

control.

The projected image freezes.

To cancel, press the [Still] button again, or

press the [Esc] button.

• During Freeze, moving images will continue to be played

back by the source, so it will not be possible to return to

the point where Freeze was activated.

• Pressing the [Still] button also clears configuration

menus.