C.T.M. HS-745 Buklet Instruksi - Halaman 11

Jelajahi secara online atau unduh pdf Buklet Instruksi untuk Skuter C.T.M. HS-745. C.T.M. HS-745 17 halaman.

7-Series

DISASSEMBLING YOUR SCOOTER

No tools are necessary to disassemble scooter. You can disassemble scooter for

transportation.

Seat (A) is removable by releasing the Seat Adjusting Lever (B) and then lift off. (See Fig. 4)

Rear Shroud (C) is removable by lifting the Rear Shroud toward the direction as the shaft

showed in the picture (See Fig. 5). And unplug (D) connections inside (See Fig. 6).

(A)

(B)

Figure 4

Unplug Wire Connect (E) of the front and rear nits. *Please make sure the main wires are

tied and placed safely on the frame structure to avoid any hazard. (See Fig. 7)

Remove Battery Fixing Velcro (F). (See Fig. 8)

Batteries are removable by detaching the Battery Power Plugs (G). (See Fig. 9)

Figure 7

Batteries are heavy please beware when removing. * Please do not touch the positive

plate and the negative plate of the batteries with any metallicity. (See Fig. 10)

Release two Locking Pins (H) to separate front and rear units. (See Fig. 11)

With one hand on rear frame (I) and other on seat piller (J) as hand hold, detach front and

rear sections. (See Fig. 12)

By removing the front basket

(K) and adjusting the tiller

down by using the tiller angle

adjustment (L) you should be

able to place all parts in the

trunk and part of the rear seat

(See Fig. 13).

Figure 5

(E)

(F)

Figure 8

Figure 10

(I)

Figure 12

Figure 6

Figure 9

(K)

(J)

Figure 13

Instruction Booklet

(D)

(G)

(H)

Figure 11

(L)