Cisco NCS 5500 Series Manual - Halaman 6
Jelajahi secara online atau unduh pdf Manual untuk Router Jaringan Cisco NCS 5500 Series. Cisco NCS 5500 Series 25 halaman. Connect router to the network
Juga untuk Cisco NCS 5500 Series: Panduan Konfigurasi (19 halaman), Manual Koneksi (24 halaman)
Halaman Cetak
Connect to the Management Ethernet Port
Connect to the Management Ethernet Port
The management Ethernet port provides out-of-band management, which enables you to use the command-line
interface (CLI) to manage the router by its IP address. This port uses a 10/100/1000 Ethernet connection with
an RJ-45 interface.
Note
To prevent an IP address conflict, do not connect the management Ethernet port until the initial configuration
is complete.
To connect cables to the system management port, attach Category 5 cables directly to the RJ-45 receptacle
on the management Ethernet port.
Figure 3: NCS 55A1
Figure 4: NCS 55A2
1
Connect Router to the Network
6
Management Ethernet
2
port
Connect Router to the Network
Console port