Cisco NCS 5500 Series Manuel - Sayfa 6

Ağ Yönlendiricisi Cisco NCS 5500 Series için çevrimiçi göz atın veya pdf Manuel indirin. Cisco NCS 5500 Series 25 sayfaları. Connect router to the network
Ayrıca Cisco NCS 5500 Series için: Yapılandırma Kılavuzu (19 sayfalar), Bağlantı Kılavuzu (24 sayfalar)

Sayfayı Yazdır
Cisco NCS 5500 Series Manuel

Connect to the Management Ethernet Port

Connect to the Management Ethernet Port
The management Ethernet port provides out-of-band management, which enables you to use the command-line
interface (CLI) to manage the router by its IP address. This port uses a 10/100/1000 Ethernet connection with
an RJ-45 interface.
Note
To prevent an IP address conflict, do not connect the management Ethernet port until the initial configuration
is complete.
To connect cables to the system management port, attach Category 5 cables directly to the RJ-45 receptacle
on the management Ethernet port.
Figure 3: NCS 55A1
Figure 4: NCS 55A2
1
Connect Router to the Network
6
Management Ethernet
2
port
Connect Router to the Network
Console port