CAB ST4 Series Panduan Operator - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Operator untuk Aksesori Printer CAB ST4 Series. CAB ST4 Series 16 halaman. Stacker with cutter

Installation

2.4

Adapting the Stacker to the Media Size

Caution!

Risk of injury!

With inappropriate tables and safety covers the reliability and machinery safety cannot be guaranteed.

 Equip the stacker only with a table designated for the media to be used and the matching safety covers.

2.4.1

Figure 7

 At ST4/L adjust side plate (4) only.

 At ST4/M adjust both side plates (4,5).

For it :

1. Loosen screws (2).

2. Adjust the side plates (4,5) to the media width using the scale (1). Use the edges (3) of the side plates as

pointers.

3. Tighten screws (2).

2.4.2

Figure 8

1 2 3 4

ST4/L

Adjusting the Side Plates

Mounting the table

1 2

1. Loosely screw the knurled nuts (3) contained in the

delivery contents of the table onto the threaded pins (2).

2. Insert the threaded pins of the table (1) into the holes of

the retainer (4) an move the table to the printer until it

stops.

3. Tighten the knurled nuts (3).

3 4

ST4/M