Argent Data Systems ADS-SR1 Panduan Pengguna - Halaman 9
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pengulang Argent Data Systems ADS-SR1. Argent Data Systems ADS-SR1 20 halaman. Simplex repeater
Halaman CetakEntering '*' at any time during a transmission causes the repeater to ignore the
current transmission, and aborts any commands being entered. This can be used
to prevent the unit from retransmitting your message, or to correct a mistake
while entering a command. Pressing '*' followed by the 3-digit voicemail access
code enters voicemail retrieval mode, detailed below.
If the repeater auto-off timer is enabled, pressing '3' will turn on the repeater
function. The repeater function will shut off again after the unit has been idle for
the specified time or when the '6' command is received. This allows users
without the access code to turn the repeater on and off as needed.
The 'stand by' tone or message option, when enabled, alerts users of the repeater
that a transmission is being recorded. This helps to prevent doubling, but results
in the first portion of the incoming transmission being dropped. When this
option is enabled, allow an extra second or so after keying the microphone before
talking.
Messages
The ADS-SR1 has 10 message slots, numbered 0 through 9. These messages can
be configured as timed announcements (each with a selectable interval and time
offset), automatic responses to incoming transmissions (often for ID or operating
instructions), or they may be triggered manually by DTMF command. Message
rotation and preamble settings are described in the command reference below.
8