Epson 4000 - Stylus Pro Color Inkjet Printer Informasi Produk - Halaman 7

Jelajahi secara online atau unduh pdf Informasi Produk untuk Semua dalam Satu Printer Epson 4000 - Stylus Pro Color Inkjet Printer. Epson 4000 - Stylus Pro Color Inkjet Printer 13 halaman. Print engine
Juga untuk Epson 4000 - Stylus Pro Color Inkjet Printer: Brosur & Spesifikasi (4 halaman), Panduan Referensi Produk (38 halaman), Mulai dari Sini Manual (6 halaman), Buletin Dukungan Produk (17 halaman), Informasi Penting (2 halaman), Garansi Terbatas (12 halaman), Panduan Referensi Cepat (11 halaman), Brosur & Spesifikasi (12 halaman), Brosur & Spesifikasi (6 halaman), Setup Manual (16 halaman)

Halaman Cetak

Epson 4000 - Stylus Pro Color Inkjet Printer Informasi Produk

Printing a Status Check

The status check sheet shows some of the current default

settings, the amount of ink remaining in each cartridge, the

page count, and the status of the cutter blade, maintenance

tank, and other printer parts.

NOTE:

You can replace the ink cartridges, cutter blade, and maintenance

tank yourself. Other parts need to be replaced by an authorized Epson

service technician.

Follow these steps to print the status check sheet:

1. Make sure paper is loaded in the tray.

Press the

button. You see

SETUP

Press the

button so you see

press

. You see

Press

so you see

STATUS CHECK

. You see

Press

again to start printing.

The amount of ink left or the component life is indicated as

follows:

E*****F = 100–81% ink or service life remaining

E**** F = 80–61%

E***

F = 60–41%

E**

F = 40–21%

F = 20–11%

% = less than 10% ink or service life remaining

PRINTER

, then

TEST PRINT

NOZZLE CHECK

, then press

Replacing an Ink Cartridge

The easiest way of checking ink levels is from the control

panel:

3sec.

Full

1 Matte

black

2 Cyan

3 Magenta

* These are the cartridges used in the photographic mode. If your

printer uses the dual CMYK mode, cartridges 5-8 will contain the

same colors as cartridges 1-4.

When the red ink light is flashing (and INK LOW is displayed

on the LCD panel), the corresponding cartridge is almost out

of ink. Make sure you have a replacement cartridge. When the

light stays on and INK OUT is displayed, the cartridge is

empty. You must replace the cartridge before you can

continue printing.

See page 3 for information on selecting the correct

replacement cartridges. Before you start, make sure the printer

is turned on. Then follow these steps to replace an ink

cartridge:

1. Note the color of the cartridge whose light is on or flashing.

This is the cartridge you need to replace.

2. Press the ink compartment cover to open it.

4/04

Epson Stylus Pro 4000

1 2 3 4 5 6 7 8

Empty

7 Light magenta*

4 Yellow

6 Light cyan*

5 Photo black*

Epson Stylus Pro 4000 - 7

8 Light

black*