Epson 4000 - Stylus Pro Color Inkjet Printer Informazioni sul prodotto - Pagina 7

Sfoglia online o scarica il pdf Informazioni sul prodotto per Stampante All in One Epson 4000 - Stylus Pro Color Inkjet Printer. Epson 4000 - Stylus Pro Color Inkjet Printer 13. Print engine
Anche per Epson 4000 - Stylus Pro Color Inkjet Printer: Opuscolo e specifiche (4 pagine), Manuale di riferimento del prodotto (38 pagine), Iniziare qui Manuale (6 pagine), Bollettino di assistenza prodotti (17 pagine), Informazioni importanti (2 pagine), Garanzia limitata (12 pagine), Manuale di riferimento rapido (11 pagine), Opuscolo e specifiche (12 pagine), Opuscolo e specifiche (6 pagine), Manuale di configurazione (16 pagine)

Stampa la pagina
Epson 4000 - Stylus Pro Color Inkjet Printer Informazioni sul prodotto

Printing a Status Check

The status check sheet shows some of the current default
settings, the amount of ink remaining in each cartridge, the
page count, and the status of the cutter blade, maintenance
tank, and other printer parts.
NOTE:
You can replace the ink cartridges, cutter blade, and maintenance
tank yourself. Other parts need to be replaced by an authorized Epson
service technician.
Follow these steps to print the status check sheet:
1. Make sure paper is loaded in the tray.
Press the
button. You see
2.
Menu
.
SETUP
Press the
button so you see
3.
press
. You see
Menu
Press
so you see
4.
STATUS CHECK
. You see
Menu
PRINT
Press
again to start printing.
5.
Menu
The amount of ink left or the component life is indicated as
follows:
E*****F = 100–81% ink or service life remaining
E**** F = 80–61%
E***
F = 60–41%
E**
F = 40–21%
E*
F = 20–11%
% = less than 10% ink or service life remaining
PRINTER
, then
TEST PRINT
.
NOZZLE CHECK
, then press
.

Replacing an Ink Cartridge

The easiest way of checking ink levels is from the control
panel:
3sec.
Full
1 Matte
black
2 Cyan
3 Magenta
* These are the cartridges used in the photographic mode. If your
printer uses the dual CMYK mode, cartridges 5-8 will contain the
same colors as cartridges 1-4.
When the red ink light is flashing (and INK LOW is displayed
on the LCD panel), the corresponding cartridge is almost out
of ink. Make sure you have a replacement cartridge. When the
light stays on and INK OUT is displayed, the cartridge is
empty. You must replace the cartridge before you can
continue printing.
See page 3 for information on selecting the correct
replacement cartridges. Before you start, make sure the printer
is turned on. Then follow these steps to replace an ink
cartridge:
1. Note the color of the cartridge whose light is on or flashing.
This is the cartridge you need to replace.
2. Press the ink compartment cover to open it.
4/04
Epson Stylus Pro 4000
1 2 3 4 5 6 7 8
Menu
Empty
7 Light magenta*
4 Yellow
6 Light cyan*
5 Photo black*
Epson Stylus Pro 4000 - 7
8 Light
black*