Cisco Meraki MR20-HW Panduan Instalasi - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Titik Akses Nirkabel Cisco Meraki MR20-HW. Cisco Meraki MR20-HW 15 halaman. Cloud-managed access point

Halaman Cetak

4. Click on the "Uplink Conﬁguration" tab. Log in. The default login is the serial

number (e.g. Qxxx-xxxx-xxxx), with no password (e.g., Q2DD-551C-ZYW3).

5. Conﬁgure the static IP address, net mask, gateway IP address and DNS servers

that this AP will use on its wired connection.

6. If necessary, reconnect the AP to the LAN.

Static IP via DHCP Reservations

Instead of associating to each Meraki AP individually to conﬁgure static IP addresses, an

administrator can assign static IP addresses on the upstream DHCP server. Through

"DHCP reservations," IP addresses are "reserved" for the MAC addresses of the Meraki

APs. Please consult the documentation for the DHCP server to conﬁgure DHCP

reservations.

Collect Tools

You will need the following tools to perform an installation: