Cisco MERAKI MR66 Panduan Instalasi - Halaman 12
Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Titik Akses Nirkabel Cisco MERAKI MR66. Cisco MERAKI MR66 20 halaman. Troubleshooting mesh communication between access points
Juga untuk Cisco MERAKI MR66: Manual (7 halaman)
Halaman Cetak
- 1. Package Contents
- 2. Understanding the MR66
- 3. Antennas and Ports
- 4. Pre-Install Preparation
- 5. Power Source Options
- 6. Factory Reset Button
- 7. Led Indicators and Run Dark Mode
- 8. Check and Upgrade Firmware
- 9. Collect Tools
- 10. Collect Additional Hardware for Installation
- 11. Installation Instructions
- 12. Choose Your Mounting Location
- 13. Verify Device Functionality and Test Network Coverage
- 14. Troubleshooting
- 15. Regulatory Information for MR66
Aim Antennas
If you are using directional antennas, aim them appropriately to ensure optimal performance for your specific network
topography. Omnidirectional antennas perform best in a mesh network when oriented vertically.
Powering the MR66 with the Meraki 802.3af Power over Ethernet Injector (sold separately)
1. Plug the power cord into the PoE Injector and the other end into wall power.
2. Plug an Ethernet cable that is connected to an active Ethernet connection into the "IN" port on the injector.
3. Route Ethernet cable from the "OUT" port on the injector to the Eth0 port in the cable bay of the MR66.
12