Cisco WAP125 Panduan Memulai Cepat - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Titik Akses Nirkabel Cisco WAP125. Cisco WAP125 13 halaman. Wireless-ac/n dual band desktop access point with poe
Juga untuk Cisco WAP125: Manual (10 halaman), Panduan Memulai Cepat (14 halaman)

Halaman Cetak

1. Default Settings

Getting Started with the Configuration

To configure the Cisco WAP125, follow these steps to access the

web-based Configuration Utility and then the Setup Wizard from your

computer:

Connect the Cisco WAP125 to the same network (IP subnet) as your

TEP

computer. The factory default IP address configuration of the Cisco

WAP125 is DHCP. Make sure that your DHCP server is running and

can be reached.

See

Incorrect IP Address

do not have a DHCP server.

Locate the IP address of the Cisco WAP125.

TEP

The Cisco WAP125 can be accessed and managed by Cisco

network tools and services including the Cisco FindIT Network

Discovery Utility that enables you to automatically discover all

supported Cisco devices in the same local network segment

as your computer. You can get a snapshot view of each device

or launch the product configuration utility to view and configure

the settings. For more information, see

findit.

b. The Cisco WAP125 is Bonjour-enabled and automatically

broadcasts its services and listens for services being

advertised by other Bonjour-enabled devices. If you have a

Bonjour-enabled browser, such as Microsoft Internet Explorer

with a Bonjour plug-in, or the Apple Mac Safari browser, you

can find the Cisco WAP125 on your local network without

knowing its IP address.

You can download the complete Bonjour for Microsoft Internet

Explorer browser from Apple's website by visiting:

http://www.apple.com/bonjour/

Locate the IP address assigned by your DHCP server by

accessing your router or DHCP server. See your DHCP server

instructions for more information.

Launch a web browser, such as Microsoft Internet Explorer.

TEP

In the address bar, enter the default DHCP address and press the

TEP

Enter key.

Enter the default user name: cisco and password: cisco in the

TEP

Username and Password fields.

Click Log In. The Wireless Access Point Setup Wizard appears.

TEP

for troubleshooting information, or if you

Cisco WAP125 Quick Start Guide