Cisco WAP131 Panduan Memulai Cepat - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Titik Akses Nirkabel Cisco WAP131. Cisco WAP131 13 halaman. Reboot and reset factory default settings
Juga untuk Cisco WAP131: Panduan Memulai Cepat (13 halaman), Manual (4 halaman), Manual (4 halaman)

Halaman Cetak

Welcome

Thank you for choosing the Cisco WAP131 Wireless-N Dual Radio Access

Point with PoE. The Cisco Cisco WAP131 is an indoor concurrent dual band

radio 802.11n access point with Power over Ethernet (PoE).

This guide is designed to familiarize you with the general layout of the

Cisco WAP131, describe how to deploy the Cisco WAP131 in your

network, and describe how to configure the Cisco WAP131. For additional

information, see www.cisco.com/go/100_wap_resources.

Before You Begin

Before you begin the installation, make sure that you have the following

equipment and services:

• A computer with browser support for:

–

Internet Explorer 7.0 or later

–

Chrome 5.0 or later

–

Firefox 3.0 or later

–

Safari 3.0 or later

• One or more Ethernet network switches with PoE

Cisco WAP131 Features

Front Panel

The front panel of the Cisco WAP131 consists of three lights: Power,

WLAN, and LAN. For full descriptions of the colors of the lights and their

indications, see

Back Panel

RESET—See

"Rebooting the Cisco WAP131 or Returning it to its

Factory Default Settings"

LAN (PoE)—The RJ-45 Ethernet port is used to power the Cisco WAP131

using PoE. It is an auto-sensing, gigabit Ethernet (802.3) port used to

connect your WAP devices to network devices, such as computers,

routers, or switches. We strongly recommend that you use a Category

5e or better cable for gigabit connectivity.

"Verifying the Hardware

for information on the RESET button.

Installation".

Cisco WAP131 Quick Start Guide