Cisco WAP300N Panduan Pengguna - Halaman 18

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Titik Akses Nirkabel Cisco WAP300N. Cisco WAP300N 30 halaman.
Juga untuk Cisco WAP300N: Manual (9 halaman)

Halaman Cetak

Linksys WAP300N

Depending on the security mode you select, you may be asked to enter

additional information Refer to the following table

Information

Security mode

Required

WPA/WPA2

Passphrase

Personal

Encryption

Key 1

WEP

Authentication

5. Click Save Settings

Description

Enter the passphrase shared by this

device and your wireless router (or

access point)

Select a level of WEP encryption, 40 /

64-bit (10 hex digits) or 104 / 128-bit

(26 hex digits)

Enter the WEP key of your network

Key 1 is the transmit key used by this

device

The default is Auto, which allows

either open system or shared

key authentication to be used

Select Open to use open system

authentication (a WEP key is not used

for authentication) Select Shared to

use shared key authentication (a WEP

key is used for authentication)

How to use Wireless Range Extender

mode

How to select Wireless Range Extender mode

To select Wireless Range Extender mode:

Setup > Operation Mode

1. Log into the browser-based utility (see "How to open the browser-based

utility" on page 8)

2. Click the Setup tab, then click the Operation Mode page

3. Select Wireless Range Extender, then click Save Settings

Setting Up: Basics