Cisco 7821 Panduan Pengguna - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Sistem Konferensi Cisco 7821. Cisco 7821 10 halaman. Connaught
Juga untuk Cisco 7821: Catatan Rilis (16 halaman), Panduan Memulai Cepat (2 halaman), Panduan Pengguna (18 halaman), Panduan Referensi Cepat (4 halaman), Referensi Cepat (4 halaman), Instalasi Cepat & Panduan Pengguna (12 halaman), Panduan Referensi (11 halaman), Panduan Memulai Cepat (4 halaman), Manual (27 halaman), Panduan Pengguna (20 halaman), Panduan Referensi Cepat Karyawan (4 halaman), Panduan Utama Migrasi Firmware (31 halaman), Manual (43 halaman), Panduan Memulai Cepat (6 halaman), Kartu Referensi Cepat (2 halaman), Panduan Memulai Cepat (2 halaman), Panduan Instalasi (39 halaman), Manual (20 halaman), Panduan Konfigurasi Ulang (2 halaman), Panduan Memulai Cepat (7 halaman), Panduan Instalasi Cepat (12 halaman), Panduan Pengguna (27 halaman), Panduan Pengguna (2 halaman), Memulai (2 halaman), Panduan Memulai Cepat (2 halaman), Panduan Pengguna (5 halaman)

Click on Admin Login in the top right corner of the administration interface.

Click on Advanced in the top right corner of the administration interface.

Click on Voice on the main menu.

Click on Ext 1 on the sub menu.

Enter or set the following details into the respective fields.

REQUIRED FIELDS:

Proxy (Proxy and Registration section)

Enter the Hostname or IP Address of the PBXware.

- Example for Hostname: voip.bicomsystems.com

- Example for IP Address: 192.168.1.10

User ID (Subscriber Information section)

PBXware extension number. Example: 1003.

Password

The Secret of the extension as received in the e-mail associated with this extension.

Example: _%Z4M3*Ts9y7. A password is generated automatically for each newly created

extension.

Navigate down to "Dial Plan" section. Clear the Dial Plan field, then copy and paste the

following value.

(*x.|**x.|*xx|[3469]11|0|00|[2-9]xxxxxx|1xxx[2-9]xxxxxx|xxxxxxxxxxxx.)

Click on the Submit button.

You'll have to wait sometime prior for the device to reboot. If everything is done as above

described, you should have successfully registered your device to PBXware.

Auto Provisioning

This chapter describes how to set UAD settings, create PBXware extension and register the

device using DHCP or Static IP address.

The following topics are covered:

- UAD Settings

- Creating Extension

- Registering Device