Epson Epson Stylus NX530 Mulai Manual - Halaman 2

Jelajahi secara online atau unduh pdf Mulai Manual untuk Semua dalam Satu Printer Epson Epson Stylus NX530. Epson Epson Stylus NX530 4 halaman. Color inkjet all-in-one
Juga untuk Epson Epson Stylus NX530: Lembar Pengaturan (3 halaman), Mulai di sini (4 halaman)

Halaman Cetak
6
Press each cartridge down until it clicks.
7
C lose the cartridge cover. Press down until it clicks. Then
lower the scanner unit and press OK.
8
W ait while the ink delivery system primes. Priming takes
about 5 minutes.
N
ote: Your printer ships with full cartridges and part of the ink from
the first cartridges is used for priming the printer.
C
aution: Don't turn off the printer while it is priming or you'll
waste ink.
9
W hen you see this menu on your product's LCD screen, do
not make a selection yet. Continue with the instructions in
the following sections to load paper in your product and
install software.
5
Load paper
1
P ull out the paper cassette at the bottom of the printer.
2
S lide the edge guides to the sides of the cassette.
3
Slide the edge guide to your paper size.
4
L oad paper against the edge guide with the glossy or
printable side facedown.
N
ote: Make sure the paper is loaded against the edge guide
and not sticking out from the end of the cassette.
5
S lide the edge guides against the edges of the paper,
but not too tightly.
6
Keep the cassette flat as you insert it.
N
ote: The paper may slide forward slightly as you insert the
cassette. This is normal.
7
E xtend the output tray and flip up the paper stopper.
N
ote: Do not flip up the paper stopper if you're using
legal-size paper.
Letter-size