Cisco 7841 Panduan Referensi Cepat - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Referensi Cepat untuk Sistem Konferensi Cisco 7841. Cisco 7841 4 halaman. Classroom phone
Juga untuk Cisco 7841: Catatan Rilis (16 halaman), Panduan Memulai Cepat (2 halaman), Referensi Cepat (4 halaman), Instalasi Cepat & Panduan Pengguna (12 halaman), Panduan Referensi (11 halaman), Panduan Referensi Cepat (7 halaman), Panduan Referensi Cepat (7 halaman), Panduan Pengguna (2 halaman), Panduan Referensi Cepat (2 halaman), Panduan Referensi Cepat (2 halaman), Manual (2 halaman), Manual (27 halaman), Panduan Utama Migrasi Firmware (31 halaman), Manual (43 halaman), Panduan Referensi Cepat (4 halaman), Panduan Memulai Cepat (2 halaman), Panduan Instalasi (39 halaman), Menggunakan (4 halaman), Panduan Pengguna Cepat (2 halaman), Manual (7 halaman), Manual (20 halaman), Panduan Fitur (4 halaman), Panduan Konfigurasi Ulang (2 halaman), Panduan Referensi Pengguna (5 halaman), Kartu Referensi Cepat (2 halaman), Panduan Instalasi Cepat (12 halaman), Panduan Memulai Cepat (2 halaman), Panduan Cepat (3 halaman), Kartu Referensi Cepat (2 halaman), Kartu Referensi Cepat (2 halaman), Panduan Memulai Cepat (2 halaman), Panduan Referensi Cepat (3 halaman)

Cisco 7841 Panduan Referensi Cepat

Muting Calls

Mute applies to all modes: handset,
headset, and hands-free.

Placing Calls on Hold

Note: When a call is on hold for an
extended period of time, you will
see and hear both visual and
audible alerts.

Forwarding Calls

You can also turn on/off call
forwarding from the User Options
web interface.

Using Do Not Disturb

Conference
You can create a conference with
multiple callers.
The conference call ends when all
participants hang up.

Transferring Calls

You can transfer incoming calls to
other extensions at your dealership.
You can perform a "blind" transfer—
where you don't announce the
call—or a "warm" transfer, where
you announce the call to the
transfer recipient.
©
2015 CDK Global
Quick Reference Guide
You can mute your phone using the Mute button. This allows you to listen to all
parties on a call but prevents them from hearing any noise coming from your line.
Press Mute
to toggle Mute on and off. When Mute is on, the Mute button glows
red.
1. Press the Hold button
the line button for the call pulses green.
2. To resume the highlighted call, press the pulsing green line button
Resume softkey.
1. Press the Fwd All softkey.
2. Enter the number you want your calls forwarded to (to forward to your voice
mailbox, press the Messages button
external numbers. The Forward All icon displays next to the line button.
3. To cancel call forwarding, press the Fwd Off softkey.
Depending on how your dealership configures your phone, when you activate the Do
Not Disturb (DND) feature incoming calls will either go immediately to voice mail or
the call will ring your phone but the visual and audible notifications will be disabled.
Turning on Do Not Disturb (DND)
Press the DND softkey. The "DND is ON" message appears.
Disabling Do Not Disturb
Press the DND softkey. The "DND is ON" message disappears.
Creating a Conference
1. While on an active call, press the Conference button
2. Dial the number to the contact you want to add to the conference call.
3. Press the Conference button
answers. The conference begins and the phone displays "Conference" instead of
caller ID.
4. Repeat Steps 1 through 3 to add more participants.
Conferencing Two Active Calls
1. While connected with two calls (one active, one on hold), press the Conference
button
or the Conf softkey.
2. Press the pulsing green line button
3. Press the Yes softkey to confirm you want to add the calls to a conference.
Viewing and Removing Conference Participants
1. To view conference participants, press the Details softkey.
2. To remove a conference participant, highlight a name then press the Remove
softkey.
1. While on an active call, press the Transfer button
2. Dial the extension to transfer the caller to.
3. Complete the transfer:
Blind: Once you hear the call ringing, press the Transfer button
Transfer softkey.
Warm: After the other party picks up the call and you announce it, press the
Transfer button
2
or the Hold softkey. The hold icon
. Be sure to include a leading 9 for
or the Conf softkey before or after the party
for the held call you want to add
or the Transfer softkey.
displays and
or the
or the Conf softkey.
.
or the
63948-01