Cisco MCS 7800 Series Panduan Utama Migrasi Firmware - Halaman 26

Jelajahi secara online atau unduh pdf Panduan Utama Migrasi Firmware untuk Sistem Konferensi Cisco MCS 7800 Series. Cisco MCS 7800 Series 31 halaman. Multiplatform phones
Juga untuk Cisco MCS 7800 Series: Panduan Memulai Cepat (12 halaman), Panduan Memulai Cepat (2 halaman), Panduan Pengguna Akhir (6 halaman), Panduan Memulai Cepat (2 halaman), Referensi Cepat (2 halaman), Panduan Memulai Cepat (2 halaman), Manual (43 halaman), Manual (4 halaman), Memulai (6 halaman), Panduan Instalasi (39 halaman), Manual (20 halaman), Panduan Memulai Cepat (2 halaman)

Halaman Cetak
Cisco MCS 7800 Series Panduan Utama Migrasi Firmware

Appendix C: Bulk Provisioning (Unified CM-Based Method)

The following steps will convert multiple phones from Enterprise to MPP firmware.
Prerequisites
•
Set up the DHCP option and file server for MPP.
•
Upgrade the enterprise phones to firmware version 12.5 with Unified CM.
Example: sip88xx.12-5-1SR1-4
1.
Upgrade the enterprise phones to the E2M migration load from the Unified FM by specifying the load name (for example,
sip88xx.TLexE2M-11-2-3C12) and load server (for example, 10.23.45.67).
2.
Allow the phones to boot up with the E2M migration firmware and find DHCP option 160.
•
The device requests $PSN.xml (for example http://10.23.56.67/8851-3PCC.xml
•
Each phone replaces the $MAU macro with its uppercase MAC address to retrieve the device-specific license file to unable
the upgrade to the requested MPP firmware.
© 2015 Cisco and/or its affiliates. All rights reserved. This document is Cisco Internal Information.
Page 26 of 30